magicjackjoe
Looking Up The Telephone Pole
Everybody has to be someplace.
Posts: 9
|
Post by magicjackjoe on Aug 12, 2008 7:00:08 GMT -8
With all of the inovators at this site, has anyone acquired or investigated the hydrogen generators or fuel cells for automobiles? Thanks Joe
**Title modified for in General Discussion, you can't be off topic.....**
|
|
taflocks
I Just Got Here
the best and cheapest phone service known to man
Posts: 2
|
Post by taflocks on Aug 15, 2008 20:51:47 GMT -8
i made one with a old water cooler jug 100 half dollar sized s/s washers and 100 small lock washers 2 bolts and some wire. it seems to give me a nice boost in power but i havent given the truk much use yet, the 1st unit i built blew up in my face when i lit a match next to it.
|
|
magicjackjoe
Looking Up The Telephone Pole
Everybody has to be someplace.
Posts: 9
|
Post by magicjackjoe on Aug 16, 2008 6:08:41 GMT -8
Two questions - what plans did you use to build yours - Water4gas? and why did you light a match to it? Joe
|
|
taflocks
I Just Got Here
the best and cheapest phone service known to man
Posts: 2
|
Post by taflocks on Aug 16, 2008 9:24:56 GMT -8
used my mind to design it. it is so simple that my mother could of built it and she has been gone 3 years...... i used a one way valve for the intake and an barbed elbow for the outflow. the outflow has no tube attached inside the vessel the intake has a tube to the bottom of the vessel. i fill the tank about half way to allow for the gases to be produced and to escape. the rods are s/s and have a hundred washers large and a hundred lock one large one lock then a nut at the bottom to hold it together. then to keep the bottoms from touching i cut a piece of plastic hanger that the stores use for pants, the wide ones with clips. i drilled holes into it and put a nut on the bottom.
i lit the match to see if it was really producing hydrogen
|
|